This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow.Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement?When the solutions were done they were evaluated and examined that they actually live up to the desired requirements.This assignment is a pure construction project where the majority is implemented in CAD, where models are developed and FE analyses are carried out. But the project also includes a feasibility study, idea study and hydraulic design.The results are presented in the form of a CAD model and associated drawings that will serve as the manufacturing basis for the new V-plow.

AbstractThis work was assigned by a technological company that manufactures gas detectors in which the sensor signal is processed using digital filters. These filters have been developed by a consultancy firm which converted previously used analog filters to digital filters. The purpose of this work has been to analyse inadequate, and sometimes erroneous, documentation from the project in order to provide the company with know-how and tools for further improvement of their products. The work has been done using the simulation software COMSOL which was bought solely for the project. Analysis showed serious flaws as well as pure errors in the consultant?s documentation.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

This master's thesis deals with the public library project called the GÖK-project, whichconcerned three Swedish public libraries: Linnestaden (Göteborg), Örnskoldsvik and Kalmar.The general outlines for the project were: reconsideration of the conception of the literaryquality, improvement of the library services, adjustment to the library user and reconsiderationof the conception of adult education to the public libraries of the 90s. The projectcaused a big national debate with effort put on the conception of the literary quality.The topic of this master's thesis is partly the GÖK-project and its general outlines, partly theaccomplishment of the project, the main point put on the public library in Linnestaden(Göteborg)..

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

The purpose of thesis was to investigate and compare how two companies within pharmaceutical industry and nuclear power industry are currently working with quality development regarding continuous improvement and Lessons Learned in business processes. In addition, a simple comparison was made with the automotiveindustry.McNeil AB are improving their processes continuously and are according to the findings of this report performing well in their pursuit of world-class pharmaceutical production. They have a well functioning process regarding improvements proposed in weekly improvement meetings engaging all employees. However, during interviews it was made clear that the functionality of the process which administer improvement proposals generated in addition to, or beside the weekly improvement meetings, were inadequate. McNeil AB is proposed to administer this through an IT solution instead of by paper and e-mail, that simplifies the process of adding, implementing and follow up an improvement proposal.The nuclear power plant Ringhals AB recently made major improvements in their business processes as well as the plant itself.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

In today?s changing environment, creation of projects by organizations has become more common. The problem is, though, that the knowledge of the subject is still limited which causes many projects to fail. This has made it extra important to have a good project manager whocanlead the project in the right direction. While doing this both the project method and the project manager?s motivation are contributing sources.

Background and aim: Organizations must be able to manage change in order to survive in today?s competitive society. To continue to develop and reach better results is fundamental. Case Company Parker Hannifin Corporation, Quick Coupling Division Europe, Tema Ingenjörsfirman AB, Skövde has an ambition to have an organization that manage changes and continuously improve its performance. That is the reason why this examination work arises.

Grus i maskineriet ? en fallstudie om förbättringspotentialVäxeln AB, a company that provide sales, service and repair of industry gears, has contacted the authors of the essay and asked us to investigate in which areas of the company that has improvement potential. Persistent improvement is a recurring and up-to-date issue that many business leaders not put enough resources on. A big problem in many companies is the issue that there is no comprehensive view and therefore some of the workers tend to not follow the routines that are required for the whole system to work.The goal with the essay is to give Växeln AB advice on to which areas in the company that have improvement potential.We have used a qualitative method with mainly semi-structured interviews which has led to an inductive approach. 13 co-workers that work in different areas of Växeln AB have taken part in the interviews.

How can a multi project organisation use Wiki to support improvement of knowledge management and project evaluation to become a learning organisation? The main purpose of this thesis is to give management and employees a better understanding of how Wiki supports knowledge management and project evaluation. The second purpose is to illustrate possible difficulties and pit falls that comes with the implementation of Wiki based learning. The theoretical framework initiates by explaining multi project organizations, then describes Argyris and Schöns theories about organizational learning and learning organizations. The second half of the theory chapter brings up theories about important areas for a learning organization.

  iiiAbstract?We are living in a time of project. Everything becomes project. All development, all efficient,all changes are running as project?.

Ellos was founded in 1947 by Olle Blomqvist and quickly grew into one of the leading mailorder businesses in Sweden. Ellos Group is in the current situation Scandinavia?s largest ecommercecompany and since 1997 owned by the French holding company Keering. Thismeant that Ellos became a part of Redcats Nordic along with brands such as La Redoute,Verbaudet , Daxon and others.2010 started a project with the aim to develop a logistic model for these products. The resultwas the department Redmap on Ellos that would serve as both a hub and distribution channelfor Northern Europe.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.